Brand New Milking Machine for Cow/Goat/Camel

Brand New Milking Machine for Cow/Goat/Camel  

Product Description

This is a piston-type milking  machine with one/ two bucket. It milk softly, which can improve the quality  and increase the yield of the milk. Change from hand to machine has many  benefits including faster milking due to improved routines and better  milk let down. Besides, it feature low noise, convenient operation and  high efficiency. I'm sure it will be a good choice for small and  medium-sized diary farms. 

Item Model	Type YDH-I	Type YDH-II
Operating Vacuum Degree	0.04-0.05Mpa(adjustable)	0.04-0.05Mpa(adjustable)
Pulsation Times	64 times per minute	64 times per minute
Power Fitted	0.55KW	0.55-0.75KW
Voltage	110V 220V 240V or 380V	110V 220V 240V or 380V
The Number of Milking Cattle Per Hour	10-12cows per hour	20-24 cows per hour
Motor Speed	1440 rpm per minute	1440 rpm per minute
The Number of Stainless Steel Milk Bucket	one(capacity of 25kg)	two(each of capacity of 25kg)
Employees Needed When Milking	one	one
The Number of Milking Cup Group	one sets	two sets

 Feature

-Low noise, convenient operation and high efficiency.
-Robust structure which means easy maintenance.
-Large heavy duty wheels to make it easy to move around.
-Robust parts which means low maintenance cost.

Operation Step

1.Before  Running the Machine:

(1) Check the  supply voltage. It should not be higher than 1.05 times of the rated  voltage. Otherwise, the machine needs to be equipped with a voltage regulator.

(2) Before boot , you need to  check the level of  lubricating oil which should be in the middle of the lubricating oil  window.

2. Running the Machine:

 Put through the power supply and turn on the power switch. Cover the milk pail and close the milk clawpiece valve. Then open the  vacuum valve on the vacuum tank. The pointer should point to 48kpa.

3.Milking

Attention: you need to put suction cups as soon as possible to reduce air flowing into  the cup, which is very important to milking machine with dual clawpiece.  That is because too much air flowing into the cups may cause the suction  cups which are put up fall off. 

The level of the milk in the pail  should not be higher than 2/3 of the height of the pail. Otherwise, milk  will be sucked into the vacuum pump and destroy the pump.

4. Cleaning

(1) Put the  machine into a container filling with 35℃ warm water.

(2) Switch on the machine and let  the water flow through the suction cups into the pail.

(3)  Wash  the pail by hand and pour the water after washing.

(4)  You  also need to wash the suction cups, milk pail and rubber pipes by hand  gradually.